July Online Only Consignment Auction  -  Online Auction


Dates
Starts: Thu, Jul 12 at 10:00 AM US/Central

Ends: Mon, Jul 23 at 6:00 PM US/Central

Auction List as of 7/11/18

Former Willmar Farm Center excess small inventory sale. Everything must go. Auction includes tools, tires, chains, jacks, trailers, loaders, and much much more! Over 100 lots! Open House: Thursday, July 19th from 4:00 – 6:00 PM!
Tractors:
Case IH MX255 Magnum, Powershift trans, 7,003 hours, 480-80R46 duals, 10 front weights front fenders, 3pt with quick tach, 1,000 PTO, 4 hyd
1981 John Deere 4640, quad range trans, 9,978 hours, 3 hydraulics, large 1000 PTO, 18.4R38 rears, front weights, SN: 020167
1980 John Deere 4440, quad range trans, 7,924 hours, 3 hydraulics, small 1000 PTO, 18.4R38 duals, new rear wheel bearing, new A/C hose, fresh oil change, 3pt w/quick hitch, front fenders, rock box, new mirrors on cab, SN: 042191R
1979 John Deere 4240, 2wd, 6,646 hours, Power Shift trans, 18.4x38 tires, with center link, AC in good working condition, SN: 13584, runs well and is in very nice shape
Steiger Cougar II, 3306 engine, 24.5x32 rubber, SN: 20797, manual trans, 3 hyd, engine has issues
1968 Oliver 1450, made by Fiat and distributed by Oliver, 4,343 hours, PS 4 speed trans w/hi and low, 4.4 liter 4 cylinder diesel engine, 55hp, new batteries, new rebuilt hydraulic pump, rebuilt generator, 16.9 x 30 rears, 7.5 x 18 fronts, 3pt, 540 2 speed PTO, 1 hyd, with operator and service manual as well as oil change records, SN: 153690
1967 Allis Chalmers I600 loader tractor, 2wd, factory loader with homemade rear weight bracket, 44hp, 6’ bucket, 14.9-24 rears, SN: 2537
1963 John Deere 4010, Syncro shift, shows 3,582 hours, less than 1,000 hours on overhaul, Year-a-Round cab, 18.4x38 rears, 10:00-16 fronts, 3pt, 1 hyd (splitter valve in cab for loader), SN :4423
1944 Farmall M, 13.6x38 rears, hydraulic pump, 2 pulley’s for belt pulley, SN: 69910

Combine/Heads:
1995 Case IH 2188 combine, 30.5L-32 fronts, 14.9-24 rears, Big Top hopper extension, 5,223 engine and 3,526 sep hours, Universal Display Plus monitor with yield and moisture display, 3 new tires last year, (1 front, 2 rears), serviced every year by Titan with records, SN: XJJC0190331
Harvestec 4308C chopping corn head, 8 row 30” with International plate, hyd deck plates, head sight, 1000 acres on complete rebuild, SN: 005163
2004 Case IH 1020 flex head, 25’, straight head with good sickle, hyd fore and aft, SCH easy cut system, SN: JJC0334437
1979 John Deere pickup head, SN: 375875

Farm Equipment:

2010 John Deere 3710 10 bottom plow, full coulters, spring reset, w/10 adjustable force cushion coulters, done approx 3,000 acres, been in shed since 2013, SN: 0004509
Soucy 32” combine tracks, used 1 season on 2,000 acres, were mounted on a John Deere 9670 STS
Standard Alloway RD180 8 row beat defoliator. *(Note from Seller: Bought new in 2010 from Wearda Implement and was used for 3 years and then they discontinued sugarbeets. We used on approx. 250 acres a year, so has only been used on a totle of 750 acres. It has been shedded ever since and is in excellent shape.) Circular scrapers, hydraulic rear lift, hydraulic rear steer, row finder, 12.4x24 tires. SN: 3159
Wishek 16’ disk, Model 842-N, 5/16 x28” blades, 12.5L-15FI good rubber, SN: 60116
7 section drag, 40’, 5 bar coil tine harrow on HD 750 cart
Internaitonal 700 plow, 8 bottom w/coulters, good rubber, on land, SN: 01930
2 wheel 30’ header trailer, good rubber, adjustable
Lorenz cultivator, 8 row 30” with row shields
John Deere 400 rotary hoe, 30’, 3pt, SN: 058586
Alloway 22’ stalk chopper, 3pt, large 1000 PTO, 3 good tires
John Deere 609 rotary mower, 6’, 540 PTO, 2 rear tires
Crown hydro reel rock picker, hyd drive, good rubber, SN: 48020
International 480 disk, 19’, manual fold, tandems on main frame
Case IH Model 6200 28’ drill, 6” spacing, with full transport cart, SN: 016851 and 016850
International 470 tandem disk, 16’
M-C (Mathews Company) 690 16' Continuous Grain Dryer, single phase, LP, on wheels, 1992 model, good working order, SN: 52750
Glencoe 1250 20' Field Cultivator, hyd wings, knock on shovels, 2 bar coil tine harrow, rear hitch (not pictured), no cracks/welds, SN: 83630
Case 7 bottom on land hitch plow, auto reset, 7/18’s
Demco 60’ tandem sprayer w/750 gallon tank, 60’ booms, Raven controls, with two new tires
International 45, 18’ digger with folding wings, black shanks
Du-al 3500 heavy duty loader with grapple and 8’ bucket, joy stick controls, brackets fit 20-30-40 John Deere series tractors
IH tandem disk
Dual 300 loader
International 12’ drill w/grass seeder

Hay/Livestock Equipment:
2004 Titan Avalanche Gooseneck horse trailer, 3 stall, rubber floor mats, double rear doors, 6 sliding windows, rear lights, tac area in front with saddle rack, very nice shape
Case IH 8312 disc bine, 12’, small 1,000 PTO, SN: 0106028 and 0094859
(40) 20’x6 bar continuous fence panels, with clips and connectors
(10) Freestanding corral panels, 24’ long x 5’ high, 2 7/8” pipe frame, 7/8” rod cross bars, arched feet, chain and latch on ends, approx 600lbs each
10 wheel rake with tedder, homemade
3x3x8 or 4x4x8 large square 3pt bale mover, stand not included
Virnig square bale over with skidsteer quick attach
Behln 1800 bu cone tank
Bulk feed bin w/electric motor (motor works, bearing is froze)
24’ free standing panel, 6’ tall
Industrias America Portable Bale Feeder, 24' long, 8 bolt hubs, new 16", 10 ply tires, flip up extendable tongue
Lorenz 80 bu grinder/mixer, 540 PTO, Model 1880 in working order, hammers are like new, 4 screens
Approx 86 pieces of Farmweld Nursery flooring, 18” x 24” with 10’ supports, 10 years old, have been washed
(3) 20” Multifan pit fan transitions
(4) 24” Multifan pit fan transitions
(60) Koca stainless water cups w/nipple and mounting brackets
(30) 3’x4’ rubber reed mats with handles
Valco Raydot barn controllers
Airstream VP 18 barn controller
(3) Phason PEC + barn controller
1975 International 230 swather, 15’ cut, like new belts, 16.5L-16.1 rubber, 4 cylinder gas engine, belt driven, bolt on guards, rivet sections, SN: 004905
Swather transport trailer with fold down ramps
Rubbermaid 300 gal stock tank, has not been in the sun
PVC Nursery panels, 10.5’ and 6.5’ to fill a 24’x54’ building making 8 pens
(8) Nursery cup water drinkers

Misc Farm Equipment:
Goodyear SW1100/45R46 combine tires, used one season (approx 1500 acres) on corn
Westfield 60-51 auger w/5hp 240 volt electric motor
Miller Plate Loader PL2, 8’ bucket, mounts for 856 International
Pallet forks off Miller PL2 loader with bale fork attachment
Gates 3 bar coil tine drag, HD, approx 32’
Digger hitch, came off John Deere 980 field cultivator
Gravity box hyd auger, steel auger
12 Chemical totels, (3 missing lids)
Gehl Hi Throw silage thrower, unknown working condition, Mdoel FB85, needs PTO, SN: 45944
6” bin unload auger, Hutchingson head w/2hp electric motor
Westfield swing hopper, dual auger, mostly for parts
Walsh sprayer, approx 30’ boom, PTO pump is stuck
Barrel sprayer frame, approx 20’ boom
Clipper 248DH grain cleaner, single phase w/10 hp electric motor
Westgo field master aguer, 7” x approx 45’ with 5hp electric motor
2000 gal poly tank and 2 cone tanks
Hutchinson 8” x 57’ aguer, electric drive
K and M snow blower, V blower, with impeller, hyd spout, 7.5’ wide
10’ pusher blade for snow removal, bolts on to tractor and loader
Quick Tach loader with 8’ bucket
New Holland 28 silage blower
3 and 4 row John Deere planters, finger units, from John Deere 7000 planter
Gravity box, approx 300 bu, rear hitch, extendable front hitch, 11L-15 rubber, minimal rust, nice shape
J+M 250bu gravity box
Bin sweep for 30’ bin w/1hp electric motor
Reman gear box for Case IH 1020 bean head, (oil bath) still in box, never been used
Rotar drive gear box for late model 23, 25, or midrange combines, some new gears, Part #84171992
10 weights (100lb) and weight bracket for 21-25 series Axial flow combine
Tebben 6’ Rotary chopper, 540 PTO
1000 gal fuel tank, gas boy pump w/meter


Vehicles:
2002 Ford Mustang, V-6, auto trans, 90,000 miles, leather interior, new front rotors and brakes, new master cylinder, 4 wheel disc brakes
2001 Ford F-150 single cab, 4x4, 124,049 miles, 4.6L Triton V-8 good rubber, long box, Weather Guard tool box, clean interior, manual windows and locks, AM/FM/Cassette, County Owned


Trucks/Trailers:
2007 IH 8600 C13, CAT engine, 380 hp, 4.11 rear end, California truck, 566,000 miles, 11R22.5 fronts and rears, VIN: 452388
1989 IH 9400 Eagle, Cat 3406 engine, 9 speed trans, overhauled within the last 100,000 miles, with all service records for past 20 years
1990 International 9400 Tri Ax grain truck, air lift tag, with 20’ box and hoist, Cummins 350hp diesel engine, Eaton Fueller 9 spd trans, 41,563 miles, tarp, air ride, 11R24.5 like new fronts (with a spare), 285/75R24.5 rears, all on aluminum rims, very good rubber, full end gate, rear hitch, Safe-T-Pull front hitch, engine heater, VIN: 034314
1990 CH 613 Mack Semi, 462,000 miles, wet kit, long wheel base, dual fuel tanks,11R22.5 good rubber, 350 Mack engine, Maxitorque Transmission, 6 speed extended range, VIN: 008065, will be DOT’d and ready to go
2014 EZ-2-Load triple axle, dual wheel deck over trailer with fold down ramps, Model # 25NTT, pintle hitch, dual jacks, 60,000lb cap, VIN: 0148
2012 Trail King live bottom trailer, Model # ASHR2-4284-84, roll tarp, belt in good condition, 43’ long, 69 cubic yard capacity (water level), 48” belt with aluminum cross tubes and chain driven belt segments of 2 ply rubber, 1/4" UHMW floor plastic (Blue Iron), top hinged tail gate with knife tailgate, air ride suspension with pressure gauge, (2) 25,000# axles, 11R22.5 rubber, LED lights, (2) Halogen spot lights
2001 Timpte 42’ grain trailer, electric roll tarp, non ag hoppers, 2 speed traps, VIN: 100191
5’ x 10’ Look 2 wheel V-front enclosed trailer w/drop down rear door
Transcraft 45’ flatbed trailer, tandem tire, dual axle, 11R24.5 tires, good rubber, rear storage, spare tire, air ride
1995 Road Boss Goosebneck trailer, flatebed, 28’ w/4’ beaver tail, tri axle, 8’ wide, 235/85R16 rubber, with ramps, VIN: 323651116013
16’ x 8’ tandem axle trailer w/fold down rear ramp, full 2” x 10” floor covered in plywood, 2” ball, brakes, has title, new fenders, 3,500 lb axles, good rubber
2017 Industrias America 836R header trailer, New, 36’ length, adjustable to accommodate any head, 7,000lb 8 bolt torsion axles, brakes on one axle, lights and fenders, load range E 16” tires, tricycle front hitch


Construction Equipment:
1998 Samsung SE240 LC3 excavator, large bucket with thumb, motor has been gone through and rebuilt 2.5 seasons ago, new drives last season, some new track rollers, no welds, SN: FGY0357
2004 Case 580 Super M Backhoe, Extend-a-hoe, 19.5L-24 rears, 4 stick control, 4,282 hours, good rubber, quick tach bucket, SN: JJG0280409
Large concrete breaker off Case 680 backhoe
Backhoe bucket off Case 580 backhoe
Triple axle, dual wheel gravel pup, 11Rx24.5 rubber, SN: 868913
Subsite 910R electronic utility locator with 950 transmitter
Spectra precision Laser, GL422 with stand and grade stick with handheld receiver and remote control
2004 CAT 257 track skid loader, quick tach, hand control, 3,437 hours, cab, (no AC), track rubber is in really good shape, new rollers and pitman arm, few new bogey wheels, SN: 00217
X Calibur thumb for mini ex or small backhoe
Vibrapac packer, 9 hp, Briggs and Stratton engine, SN: 2979
Owens Vibrating concrete screed w/Honda GX31 4 stroke gas engine, w/10’ bar
L.B. White Premier 350 DF, 350,000 BTU heater, Natural Gas or Propane (set up for natural gas now)
Weber wet screed vibrating concrete screed w/Honda GX22 4 stroke gas engine, w/4’, 12’, and 16’ bar
Wacker BTS 1035 L3 concrete saw w/14” blade
8’ Pull type box scraper, bolt on replaceable cutting edge, includes cylinder and hoses (call for pricing and availability), color may vary

Misc:
2017 Magnum 4000 Gold Series power washer w/15hp gas motor, diesel hot water heater, never been used
Titan Industrial Generator, Model 6500 diesel, 650 watt, electric start
Titan commercial trash pump, Model TA-300, 6hp w/3” hose
John Deere 3020 gas, narrow front, power shift, 15.5 x 38 rubber, 2 hyd, misses on one cylinder
Dayton 110 volt industrial grinder
Sentinel 28 gun combination safe, new in box
Kushlan electric cement mixer, new
Briggs and Stratton 6.75 power washer, new
John Deere 148 loader (brackets fit 20 series tractor)
Camper converted to fish house, needs new tires
Misc landscaping brick
Aeration floor for 18’ bin
Misc aeration planking
Aeration tunnel for 18’ bin
Budd Wheel CP 797, 1” air impact with long anvil, few extra sockets
Banner 10 ton air over hydraulic floor jack
Circular buzz saw that runs off belt pulley on tractor, 30”
14’ x 24’ shed to be moved
All new siding, windows, shingles and doors, enough to do a 14’ x 24’ shed, 1/2 log tongue and groove siding and corner trim pieces, 6 windows, 1 door, and shingles
(6) Old wagon wheels
Bixby MaxFire pellet stove, board is out
(2) 48” pallet stackers
Commercial carpet cleaner, has not been ran for 15 plus years, propane water heater, some assembly will be needed from being removed from trailer
Patio heater
Kitchen cabinets
Model Tractors, Oliver, IHC, CIH and more, some Precision, 1/16 and 1/32
Antique sharpening wheel
Antique buggy with wooden wheels
Antique green painted wagon w/red wooden wheels
Pallet racking w/12 beams, 8’ x 45”, 12 wire deckings, 43”, 4 uprights 8.5’ x 42”
6’ hydraulic driven broom
Rock wagon, fits 30” rows
Air hose reel
Pallet of (24) plastic picket fence, 4’ x 8’
Pallet of (24) plastic picket fence, 4’ x 8’
Pallet of (24) plastic picket fence, 4’ x 8’
Diamond plated pickup tool box
11 bale heavy duty homemade trailer on a heavy duty JM running gear
Set of red fenders
Yellow steel cabinet holding an air compressor and generator
(31) 67lb weights off a New Holland 9682, also includes weight bracket
(10) 100lb weights off a Ford 9600
(10) 100lb weights off a John Deere 4555, also includes weight bracket
(2) full sets of 710/70R38 duals off of combine, 80% rubber, 10 bolt hub
(1) set of 16.9x30 tires on rims, fit a John Deere 4960, 50%


Lawn and Garden/Recreation Equipment:
2007 Keystone Cougar Model 311EFS, clean and well maintained, been winterized, new awning 2017, 2 slides, bedroom and living room area, under bed storage, booth dining with under seat storage, replaced inverter 55 amp 2018, gas and water heater DSI, gas and electric fridge, 30 in. flat screen TV, laundry chute, AM/FM/CD stereo, spare tire carrier and rear bike rack, 2 - 30 lb. LP tanks, 8630 lb.dry weight, 45 gal. fresh water, 76. gal.gray water, 38 gal. black water
Agri fab lawn vac, w/9hp (205cc) gas engine, with 26 bushel cart, used only 2 times, like new
King Kutter Model FM-72-Y, 6’ Finishing Mower
1988 Alumacraft boat, Mercury 115hp motor, Depth finder, power trim tilt, 17.5’ boat, Trophy 180 CS Minnkota trolling motor, with Yacht Club roller trailer, new tires last year, SN: ACBX5189M83H
2002 Suzuki Savage LS650 motorcycle, 9,176 miles, less than 1,000 miles on Kenda tires, single piston engine, 1 year old battery, includes saddle bags, fork bag, repair manual, 2 helmet locks, clock, tank protector and bug shield, custom seat will not be included, will be sold with factory seat
Cub Cadet LTX 1045 hydrostatic lawn mower, 46” deck, needs a belt and bearing, Kohler Courage 20 motor, 294 hours
John Deere 4100 hydrostatic diesel lawnmower w/3pt hitch, 1,007 hours with a like new John Deere 47 quick hitch snowblower and a John Deere 60” commercial deck
Cub Cadet 1250 garden tractor with 40” tiller and 42” snowblower
NEU 7’ 3pt tiller, gear driven, 540 PTO for Cat. 1 and 2 hitches
4 Swagman Bike Receiver hitch bike rack
1996 Ski Doo snowmobile MXZ440, in working order
1985 Polaris 250 3 wheeler, rare, reverse, electric start, ran when parked
1982 Lund fishing boat, mid range deep-wide with 1980 Shore Lander trailer, heavy duty, good lights, new tires
1981 Honda 900 motorcycle, shaft drive, Vetter fairing, runs, extra frame and parts
John Deere 38” snow blower, SN: M02461X595209
Yard grader made by Tebben Mfg., 8’


Skid Steers and Attachements:
Hawz Attachments Heavy duty brush mower, HD Omni gearbox, standard 15-25 GPM flow, HD push bar, HD welded bottom runners, HD stump jumper, 1/2" twin blades, attachable safety chains, comes complete w/hoses, fittings and flat faced couplers, new
Hawz Attachments Heavy duty skeleton rock and brush grapple, 84”, 3” spacing between HD tines, hardened cutting edges, dual cylinder grapples, will open and close together, but close to different levels for uneven loads, comes complete with hoses, fittings, and flat faced couplers, new
Hawz Attachments Heavy duty skeleton rock and brush grapple, 74”, 3”spacing between HD tines, hardened cutting edges, dual cylinder grapples, will open and close together, but close to different levels for uneven loads, comes complete with hoses, fittings, and flat faced couplers, new
Hawz Attachments Heavy duty skeleton rock buckets, 78”, 3” spacing between HD tines, hardened cutting edge, new
Hawz Attachments Heavy duty skeleton rock buckets, 68”, 3” spacing between HD tines, hardened cutting edge, new
Hawz Attachments Elite Industrial Tree and Fence puller w/Push bar, rated for up to 8” trees, HD 2500 PSI cylinder, hardened teeth for longevity, weld on push bar option, 3”x3” tubing frame, new
72” Brush Grapple, universal quicktach, 3/8” tines spaced 9” apart, made with grade 50 steel, includes hoses and couplers, new
96” Jenkins high volume snow and material bucket, 3/4" reversible bolt on cutting edge, 3’ tall by 3.5’ deep for high volume capacity, 3/16” bucket material thickness, 5/16” end plates, 1/2” x 2.5” under supports for added durability, new
Bale Spear, universal quick attach plate, 3000lb capacity, 43” main spear, (2) 17” stabilizer spears, new
Pallet Fork/Bale Spear/Receiver Hitch Combination, universal quick attach, 42” pallet forks (4,000lb), 49” bale spear (3,000lb) w/(2) 17” stabilizer spears, receiver hitch, new
Mount Plate Attachment w/Receiver, 3,000lb rating, safety chain holes, Gusseted for extra strength, grade 50 steel, new
Tree/Post Puller, universal quick attach plate, powder coated finish, 2” hydraulic cylinder w/3,000lbs of clamping force, hoses and flat face couplers, teeth are 1” thick, new