January 2019 Online Only Equipment Consignment Auction  -  Online Auction


Dates
Starts: Thu, Jan 10 at 10:00 AM US/Central

Ends: Mon, Jan 21 at 6:00 PM US/Central

Tractors:
2005 John Deere 8420T, 3,366 hrs, 5 hyd, 3pt, PTO, 24” tracks, leather seat, HID lights, auto steer ready, 2nd owner, (Globe and Screen do not go with) SN: 905330
1990 Ford 976 Versatile 4wd, 7,206 hours, rock box, rear weights, 4 hydraulics, LED lights, heat/air, radio, 12 forward and 4 reverse gears, 650/75R32 BF Goodrich duals, SN: D450365
1988 John Deere 4850, 2wd, 11,155 hours, 3 hyd, large 1000 PTO, 3pt, cab with air/heat, 5.20-85R42 rears (like new), 14L16 fronts @ approx. 80%, new lower cab kit, SN: 013148
1972 Case 970 Agri-King, 18.4-34 rears (in good shape), 10.00-16 fronts, 5,072 hours, heater, 3pt, 2 hydraulics, 540 PTO

Tillage:
2013 Case IH 870 Ripper, 11 shank, 23 ¾” front disks, 17 ¾” rear disks, 5 bar spike tooth harrow, 16.5L-161F1 rubber, SN: YDD066223
Summers Disk Chisel, 32’, disks at 21 ½”, 4 bar coil tine harrow, SN: K1151
John Deere F145 5 bottom 16” collector plow, trip bottom, nice shape
John Deere 2500, 5 bottom hydraulic reset plow, 18” to 22” adjustable width, shares and lays in good shape
John Deere 2800 variable width plow, 7 bottom, 2pt hitch
Wilrich 2900 onland plow, 8 bottom

Livestock Equipment:
Lorenz silage wagon, 540 PTO, front and rear unload with left side extension, on Minnesota 10 ton running gear
Kelly Ryan 8’ x 150’ silage bagger with (1) 8’ x 150’ Up North bag, with backstop, 540 PTO
Penta 4120-HD TMR mixer, Digi-Star scale, 420 cubic feet, 540 PTO, hydraulic conveyor, new knives in 12/2018
(2) 6’ gates with brackets
(1) 14’ gate with brackets
(3) 16’ gates with brackets
7 continuous galvanized fence panels, 20’
(2) free standing continuous fence panels with feed bunks
John Deere 3950 pull type silage chopper with Dohrect Enject Applicator, electric unhook for wagon, has all filler plates, recent screener for earlage, large 1000 PTO hydraulic tongue, green spout
John Deere 3950 pull type silage chopper, small 1000 RPM, yellow spout
John Deere 343 earlage head, 3 row
John Deere 2 row silage chopping head
John Deere 7’ hayhead
(40) 20’x6 bar continuous fence panels, with clips and connectors
(10) Freestanding corral panels, 24’ long x 5’ high, 2 7/8” pipe frame, 7/8” rod cross bars, arched feet, chain and latch on ends, approx 600lbs each
New Industrias America Portable Bale Feeder, 24' long, 8 bolt hubs, new 16", 10 ply tires, flip up extendable tongue
2018 Industrias America 625 bale wagon/transport, 8 bale capacity, 14K load rating, Tricycle front end makes for easy pulling, new 16” – 10ply tires, choice of Red or Blue
10 grass bales, new wrapped, baled with John Deere 567 baler, 5 x 6 bales
18 grass bales, twine tied, baled with New Holland baler, 5 x 5 bales, (2) are 4 x 5
10 corn stalk bales, baled dry by John Deere 567, netwrapped, 5 x 6 bales

Semi:
2007 Volvo Day Cab semi tractor, shows 700,000 miles, 50% rubber, wet kit, Big Cummins engine, 10 speed transmission, runs and drives good

Trailer:
2008 EZ-Haul 19’ deck over trailer with 5’ beaver tail, flip up ramps (spring assist), tandem 7,000lb axles with tires in excellent shape, good planking, front storage, brakes, (high speed on the jack does not work), all LED lgiths, 12” I-beam frame, 16” on center cross sections

Grain Handling Equipment:
1,000 bu holding tank on wheels
8” x 71’ Feterl auger, 540 PTO
Farm Fans 36” fan heater, propane, 240 volt, SN: 60005
24’ Utility trailer, tandem axle, good rubber, steel deck, ag hitch, brakes
9’ home made utility trailer
Westfield 10” utility auger, approx. 38’, used
Sukup bin heater, (axial or centrifugal) propane or natural gas, 115 volt, never been used, SN: 74890

Misc Equipment:
2017 Industrias America 836R header trailer, New, 36’ length, adjustable to accommodate any head, 7,000lb 8 bolt torsion axles, brakes on one axle, lights and fenders, load range E 16” tires, tricycle front hitch
Heavy duty box blade, 11” long, 3’ high, 3’ wide, has brackets to chain on skidsteer bucket
Flexi Coil system 82 Downforce harrow, 60’, hydraulic lift
John Deere 2 row planter, finger units, from John Deere 7000 planter, completely gone through
1966 Ford 390 V-8 and related parts, Gasket set, engine stand included (no engine heads, also missing the pan)
(8) John Deere 100lb front weights and bracket (came off John Deere 8300)
Buhler Allied 595 leader w/7’ bucket, Allied quick tach, good cylinders, all brackets included
StarFire 3000 Globe, 2017, SF1
Easy Guide Ag Leader monitor, 500 Auto Steer Navigation system off a John Deere 8420 (complete)

Misc:
Set of front fenders, new, no holes or brackets
Reznor Model F165 hanging shop furnace, 165,000 BTU in working order, was initially installed in 2004, just replaced Thermo Coupler
40 hp Balder electric motor, 3 phase, in working order
Antique disk sharpener, working order
(3) Livestock water heaters, 110V
(3) Buzz boxes, 3 phase, 50 amp max
(2) scoop shovels
Horncraft electric grinder on stand
35 gallon cone bottom tank
(5) hog feeders
Nu Bilt Co Flair Wagon on John Deere running gear, good floor
Single driving harness with collar (not pictured)
12’ x 4” cross auger with Craftsman 1/2hp electric motor
Shelby trailer jack
Adjustable 3pt arm
Welding table
15” Dakota saddle
Chain on fork extensions for bucket, 3” x 2” x 82” long
Diebold 25” x 25” x 36” tall heavy duty steel safe, currently open, have 2 of 3 numbers, (can take off inside panel and reset numbers)
Lincoln Arc Welder, 225 amp, Model # AC225S with cart, misc rods, and milk crate (with misc)
Louisvill ladder, 6’ of step, safety railing on wheels, brake works
Cherry picker engine hoist on wheels, 2 ton, works
(2) Cargo load binder jack, 7’ 6” when compressed, can go up to 104”
Heavy Duty load restraint, 7’ 6” when compressed, can go up to 104”
Air activated transmission jack/tire lift
Sun Brand Ampmeter Tester on wheels
(2) Approx 140 welding rods in box, #7014, 3/8
Stanley Laser level on tripod, red laser beam, works great
Goodyear 480/80R42 combine duals on rims, came off John Deere 9670, (1 tire has tear in tire)
John Deere Flex head snouts off John Deere 635F

Electric Motors:
(2) New 2hp single phase Leeson electric motor, 2850 RPM, Frame Size H5682
New 3hp single phase Leeson electric motor, 3450 RPM, Frame Size K145P
New approx. 2hp electric motor, smaller shaft, motor has mechanical brake
New 4hp electric motor, 1750 RPM, Frame Size XL558C, smaller shaft
New Leeson 2hp electric motor, 2850 RPM, Frame Size H5682Z
New 1/8hp 90 degree shaft on end, 180 volt
Baldor 10 hp 3 phase electric motor, 230/460 @ 1770 RPM, 1 3/8” shaft
Baldor 7.5 hp 3 phase electric motor, 1760 RPM, 1 3/8” shaft
Baldor 10 hp 3 phase electric motor, 1770 RPM, 1 3/8” shaft

Construction Equip:
2012 Bobcat S630, 2 speed, hyd quick tach, joystick controls, 2 front aux hydraulics, Hi Flow hydraulics, 2,200lb lift, Kobota diesel engine, block heater, cab, heat/air, w/door, 3,568 hours, comes with 78” quick tach dirt bucket, SN: A3NT15240
1991 John Deere 544E Payloader, 13,000 hrs, very few hours on complete overhauled, tight clean machine, good cab, heater, and brakes
MEC 3068 scissor lift, 68” wide, 36’ working height, non marking all terrain tires, newer batteries, shows 569.2 hours

Skidsteer attachments:
Hawz Attachments 72” Heavy duty brush mower, HD Omni gearbox, standard 15-25 GPM flow, HD push bar, HD welded bottom runners, HD stump jumper, 1/2" twin blades, attachable safety chains, comes complete w/hoses, fittings and flat faced couplers, new
Hawz Attachments Heavy duty skeleton rock and brush grapple, 84”, 3” spacing between HD tines, hardened cutting edges, dual cylinder grapples, will open and close together, but close to different levels for uneven loads, comes complete with hoses, fittings, and flat faced couplers, new
Hawz Attachments Heavy duty skeleton rock and brush grapple, 74”, 3”spacing between HD tines, hardened cutting edges, dual cylinder grapples, will open and close together, but close to different levels for uneven loads, comes complete with hoses, fittings, and flat faced couplers, new
Hawz Attachments Heavy duty skeleton rock buckets, 78”, 3” spacing between HD tines, hardened cutting edge, new
Hawz Attachments Heavy duty skeleton rock buckets, 68”, 3” spacing between HD tines, hardened cutting edge, new
Hawz Attachments Elite Industrial Tree and Fence puller, rated for up to 8” trees, HD 2500 PSI cylinder, hardened teeth for longevity, weld on push bar option, 3”x3” tubing frame, new
96” Jenkins high volume snow and material bucket, 3/4" reversible bolt on cutting edge, 3’ tall by 3.5’ deep for high volume capacity, 3/16” bucket material thickness, 5/16” end plates, 1/2” x 2.5” under supports for added durability, new
Bale Spear, universal quick attach plate, 3000lb capacity, 43” main spear, (2) 17” stabilizer spears, new
Pallet Fork/Bale Spear/Receiver Hitch Combination, universal quick attach, 42” pallet forks (4,000lb), 49” bale spear (3,000lb) w/(2) 17” stabilizer spears, receiver hitch, new
Mount Plate Attachment w/Receiver, 3,000lb rating, safety chain holes, Gusseted for extra strength, grade 50 steel, new
Tree/Post Puller, universal quick attach plate, powder coated finish, 2” hydraulic cylinder w/3,000lbs of clamping force, hoses and flat face couplers, teeth are 1” thick, new
82” Rock/Brush Grapple, (Like new), Universal quick attach plate, powder coated finish, replaceable teeth, open tine bottom, (4” spacing), frame built with 3” x 3” steel tubing, tines are 1/2" grade 50 steel, (2) 2.5” bore x 8” stroke hydraulic cylinders
Walk through pallet forks, 48” forks, 5,500lb capacity, HD slider rail

Recreational:
1998 Polaris Indy Trail 500, 3,500 miles, runs good, thumb and hand warmers
Yard Machine 18” string trimmer, runs good, 4hp motor
Yardman 7hp walk behind snow blower, 24” cut, Techumse motor, electric start (recoil is broke but electric start works)
7.5’ x 12’ fish house, built in 2000, three crank frame, pro-com heater, gas light, 4 holes, has not been used since 2012