April Online Only Consignment Auction *List Is Posted. Pictures Coming Soon!*  -  Online Auction


Dates
Starts: Thu, Apr 5 at 10:00 AM US/Central

Ends: Mon, Apr 16 at 6:00 PM US/Central

Auction List:
Tiling Machine:
2011 Inter-Train Model 2050SP Plow, SN: D11101, has approximately 2200 hours, the pipe boot and shanks are set up for 4, 6, and 12” tile. Has a tile carrier to attach to machine and it has a power feeder for tile. Has onboard GPS with Trimble system.

Tractors:
2008 John Deere 8130 MFWD, 2,513 hours, SN: RW8130P027874, Power Shift trans, 4 hyd with power beyond, HID lights, 3pt, 320/85R38 fronts, 380/90R50 rear duals, good rubber all the way around, auto track ready, Deluxe cab, rock box, always had 100 hours oil changes and regular maintenance at John Deere Dealer in Madison, MN

2000 John Deere 7810 MFWD, 7,793 hours, Power Shift 19 speed trans, 3 pt, front fenders, triple hyd triple hydraulic link front suspension, new exhaust, recent water pump, cab headliner, and air conditioner, new center drive motor to transmission, fresh oil and hyd filters, good maintenance records, nice tractor
1963 John Deere 4010 diesel, Syncro shift, professionally restored, new injectors and pump, rebuilt motor by John Deere, has 36 hours since restoration, converted to 12 volt system, new alternator and starter, dual SUV’s, new tires, new batteries, new gauges, all lights work, very nice tractor
1957 Allis Chalmers D17, Parade ready, engine rebuilt in 2007, complete restore, 16.9x28 rears, 6.5x16Sl fronts, single hydraulic, rear wheel weights, 540 PTO, SN: D1714958D
Farmall FC, gas, NF, 12.4-36 rear rubber @ 95%, very good shape, with 6’ Sun Master belly mower, SN: 16647

Combine:
2007 John Deere 9660 STS, All Wheel Drive, 3,213 eng hours, 2,491 sep hours, high capacity unload, deep tooth chaffer, 480/80R42 fronts, 28L26 rears, very well maintained, through shop every year, shedded and waxed yearly, very clean

Corn Head:
2007 Drago 8 row 30” corn head, corn saver kit, knives have approx 600 acres on them, have not been flipped, reason getting rid of is switching to 22” rows

Planter:
IH Cyclo 400 8 Row 36”, corn and soybean drums, always shedded, has seen little use, no monitor

Tillage:
2010 Case IH 330 Turbo disk, true tandem, 34’, hyd leveling flat bar rolling basket harrow, rigid scrapers, front sections replaced before last fall
John Deere 400 Rotary hoe, 20’
WilRich Quad 5 field cultivator, 36’, SN: 440622
Summers Coil packer, 36’, SN: 88780
White 226 field cultivator, 26’, most points in excellent condition, spike tooth drag, flat folding, walking tandems, receiver hitch on rear, 9.5L-15SL tires, hitch has been converted to single pull
John Deere 12 row 30” field cultivator, 3pt, some new shovels, with shields, field ready, SN: 000739N
Yetter Model 3421 Rotary hoe, 21’, 3pt, SN: 3341

Sprayer/Tanks:
1997 Ro-Gator sprayer, 90’ booms, Light Bar, foamer, stainless steel tank, adjustable nozzles, row shut offs, 7,000 hours
Hardi Commander 90’ Sprayer, 90’ boom set up for 88’ with 20” spacing, triple nozzle bodies, boom shutoff switches, 1,000 gal poly talk, 13.6x38 tires with Hardi 2500 controller, 1,000 PTO, set up for 22” rows, everything is in working order, always shedded
(3) Ace Roto Mold 1,600 gallon poly tanks, top man hole, 2” bottom discharge, (no valves included) always been inside, top tie down notch, were used for liquid fertilizer

Livestock Equipment:
(40) 20’x6 bar continuous fence panels, with clips and connectors
(15) Freestanding corral panels, 24’ long x 5’ high, 2 7/8” pipe frame, 7/8” rod cross bars, arched feet, chain and latch on ends, approx 600lbs each

Misc. Equipment:
Standard Alloway RD180 8 row beat defoliator. Circular scrapers, hydraulic rear lift, hydraulic rear steer, row finder, 12.4x24 tires. SN: 3159
Bale conveyor with electric motor and diverter, 46’
Ace Centrifugal sprayer pump
3 pt blade for tractor
3pt forklift, 3 stage
3pt bale spear, removable/replaceable main spear, Model R5500, 2,000lb capacity
18’ hay rack with rear tandem axle (6 wheels total) with 1,650 gallon water tank with inductor and Briggs and Stratton motor and pump, with hose, always shedded

Construction Equipment:
2002 Case 590M Series 3, 4x4 Extend-a-hoe Backhoe, 4 in 1 bucket, 7,000 hrs, work ready, very clean
John Deere 690B Excavator, farmer owned, good clean excavator, work ready
Heil gravel pup trailer, 12 yard box, not been used for a couple of years, needs some TLC on running gear, gate and cylinder are good
8 x 12 Feeder bin, brand new belt, skirt, boards, head pully, drive belts, and bearings, new electric motor last fall (3 phase, 480 volt, 25hp) comes with Grizzly bars
Cedar Rapids 12’ x 4’ 3 deck screen box
Caterpillar D-7 17A
(2) Caterpillar RD-7, running
11 Yard Garwood scraper
1984 Standby Power AC Generator, Cummins diesel, 100KW, 208/120 volts, onsite energy digital control panel, all in working order, was former Chippewa County Sheriff Dept. backup generator, regular maintenance always done, ran monthly and annually tested by Generator System Services, approx 500 hours
8’ Pull type box scraper, bolt on replaceable cutting edge, includes cylinder and hoses (call for pricing and availability), color may vary

Concrete Equipment:
Bartell Power Trowel, 36” with 9hp Honda engine, excellent working condition
Morrison 27’6” screed with older Honda engine, with (2) 10’, (1) 5’, and (1) 2’6” sections, fair condition
24” packer with 5hp Briggs and Stratton engine
(4) cement blankets, 12’x25’, good condition
A1 scaffold, 8 ends, 5’ wide x 4’ high, includes bracing for 5’ and 7’ length
(4) caster wheels for scaffold

Skid Steers and Attachements:
2015 JCB 260 Eco Powerboom skid loader, 113.9 hours, 2,600lb cap, 74 hp, side door, manual quick tach, never flat tires, cab, heat/air, hand controls, foot gas feed, front aux hyd, comes with a dirt bucket with a bolt on cutting edge, SN: GEO260WVCG2428423
86” skid steer hydraulic dozer blade, new
Hawz Attachments Heavy duty brush mower, HD Omni gearbox, standard 15-25 GPM flow, HD push bar, HD welded bottom runners, HD stump jumper, 1/2" twin blades, attachable safety chains, comes complete w/hoses, fittings and flat faced couplers, new
Hawz Attachments Heavy duty skeleton rock and brush grapple, 74” and 84”, 3” spacing between HD tines, hardened cutting edges, dual cylinder grapples, will open and close together, but close to different levels for uneven loads, comes complete with hoses, fittings, and flat faced couplers, new
Hawz Attachments Heavy duty skeleton rock buckets, 68” and 78”, 3” spacing between HD tines, hardened cutting edge, new
Hawz Attachments Elite Industrial Tree and Fence puller w/Push bar, rated for up to 8” trees, HD 2500 PSI cylinder, hardened teeth for longevity, weld on push bar option, 3”x3” tubing frame, new
72” Brush Grapple, universal quicktach, 3/8” tines spaced 9” apart, made with grade 50 steel, includes hoses and couplers
72” Stout Material/Brush Bucket, universal quick attach plate, high strength steel, 3/8” sides, 1/4” bucket, 3045 PSI lines with 1/2" cap, grapple opening 32”, grapple 18” width, includes flat face couplers, new
96” Jenkins high volume snow and material bucket, 3/4" reversible bolt on cutting edge, 3’ tall by 3.5’ deep for high volume capacity, 3/16” bucket material thickness, 5/16” end plates, 1/2” x 2.5” under supports for added durability
Bale Spear, universal quick attach plate, 3000lb capacity, 43” main spear, (2) 17” stabilizer spears, new
Pallet Fork/Bale Spear/Receiver Hitch Combination, universal quick attach, 42” pallet forks (4,000lb), 49” bale spear (3,000lb) w/(2) 17” stabilizer spears, receiver hitch, new
Mount Plate Attachment w/Receiver, 3,000lb rating, safety chain holes, Gusseted for extra strength, grade 50 steel, new
Skid Steer Backhoe, 6’ digging depth, greaseable pins and bushings, 8” bucket, includes hoses and flat face couplers, new
Tree/Post Puller, universal quick attach plate, powder coated finish, 2” hydraulic cylinder w/3,000lbs of clamping force, hoses and flat face couplers, teeth are 1” thick, new

Shop Tools:
10’ 20 drawer heavy duty metal work bench, comes with 40” high hanging peg board, stainless steel drawer panel, metal handles, new
Dewalt 18V sawzall, 3 flashlights, impact driver, 2 drills, circular saw, 3 chargers, 5 batteries
(2) Dewalt radio’s with charging station
Dewalt 18V 1/2" compact drill/driver kit, new in box
Dewalt 18V compact and impact drill, comes with 18V to 20V adapter

Vehicles:
2010 Ford Ranger, 2wd, 4 cyl engine, 172,476 miles, towing package, tonneau cover, new wheel bearings in font, auto transmission, manual locks/windows, good rubber, has new tabs
2001 Dodge Laramie SLT pickup, 1/2ton, 4x4, 220,617 miles, V8 engine, power windows, locks, Luverne running boards, bed rails, mud flaps, good rubber

Misc:
(8) 5 x 6 x 10’ treated posts
Pile of 2 x 10 dimensional lumber
Set of 18.4x34 band duals
(3) Cyclone chicken feeders
11:00x22.5 trailer rim and tire
1 pair of 11R24.5 tires (capped)
1 tire and rim off a DMI Ripper, 16.5L x 16.1, 12 ply
1 Black plastic tool box
White truck mate tool box for S-10
Aluminum tool box
Metal storage cabinet
Water tank with hog drinker
1 bale of baler twine
Pallet of misc tools
Misc John Deere 7000 planter parts, including 7 bearings for closing wheels, 1 new gauge wheel, cover for finger unit
Misc spray guns for paint
2 orbital and vibrating sanders
Regulator and water filter
2 saws and planer, oil cans and levels
(6) Michelin radial 14.00R24 Road Grader tires, 40%, all hold air
Handmade above ground Fire Pit
Noma 10hp electric snow blower, electric start, 33” cut